Home About Us Technology Products Solutions Filtration
News & Events Download
Contact Us Investors

For flow rates up to 400 m³/h; 1,760 USgpm
Filtration degrees from 500 to 10 micron
Filter area 1500 - 6000cm²; 233 - 930 in²

The SAF series are automatic filters, with a self-cleaning
mechanism driven by an electric motor. The SAF filters are
designed To work with various types of screens in filtration
degrees from 500 To 10 micron.
80 m³/h
350 USgpm
150 m³/h
660 USgpm
250 m³/h
1100 USgpm
400 m³/h
1760 USgpm

Filtering process:
The water enters through the inlet pipe into the coarse screen from outside in, and through the fine screen from inside out. The "filtration cake"
accumulates on the fine screen surface and causes head loss To develop. The coarse screen is designed To protect the cleaning mechanism from
large dirt particles. It should not accumulate large quantities of suspended solids and is not cleaned automatically.

Self-cleaning process:
The SAF filter will start the self-cleaning process when the pressure differential across the screen reaches a pre-set value or a predetermined
lapse of time.
Cleaning of the filter element is carried out by the suction scanner, which rotates in a spiral movement while removing the filtration cake from
the screen, and expels it out through the exhaust valve. The rotation of the scanner is operated by a 2-way (fwd/rev) drive unit that is attached
To the scanner by a threaded shaft, providing the linear movement.
The exhaust valve is activated For the duration of the cleaning cycle by a 3-way solenoid. During the self-cleaning process, which takes
approximately 35 seconds, filtered water continues To flow downstream.

About | Technology | Solutions |Filtration Glossary | News & Events | Contacts | Investors | Terms of Use | Privacy Policy | Credits
Copyright 2005 Amiad Filtration Systems Ltd. All rights reserved.
follow us on